Skip to content

preview

Description

EVA 2 supports The Orbiter created by dr Robert Lorincz. You can also check other Orbiter Projects here.

Since EVA 2.2.1 Orbiter 1.0 was deprecated and removed. Orbiter 1.5 is also going away in favor of Orbiter 2.0.

Orbiter 1.0 users

Old parts supporting the old Orbiter can be found in git history on tag 2.2.0

  • used by: 52.20 % (based on 2021-11 survey)
  • EVA spec: 2.4.0
  • authors: pkucmus
  • official

(Survey result is shared with Orbiter 2.0)

Universal EVA Front

This drive uses the universal face, which means it's compatible with all hotends you can find in the Hotends section.

Bill of materials

PTFE Tube lengths

I have split the lengths into two, the drive side and the hotend side. You need to sum the two lenghts from this and the hotend BOM you'd be using. (preferrably get more PTFE)

Do not cut the PTFE into two pieces

Item Quantity Name Printable
1 1.0 bottom_mgn12_short_duct yes
2 21.0 M3 Hex nut no
3 5.0 DIN 912 M3 12 mm no
4 2.0 DIN 912 M3 35 mm no
5 1.0 TriHorn Duct Default yes
6 1.0 back_corexy yes
7 2.0 tension_slider_9mm_belt_M5 yes
8 1.0 DIN 912 M3 25 mm no
9 2.0 DIN 912 M5 45 mm no
10 2.0 M5 Hex nut Nyloc no
11 1.0 5015 fan no
12 1.0 top_orbiter_1_5_mgn12 yes
13 2.0 DIN 912 M3 35 mm no
14 8.0 DIN 912 M3 10 mm no
15 1.0 Housing 1.5 no
16 2.0 M3 Hex nut no
17 1.0 cable_holder yes
18 1.0 unversal_cable_mount yes
19 2.0 DIN 912 M3 10 mm no
20 1.0 PTFE 27.2mm no
21 1.0 universal_face yes
22 2.0 face_belt_grabber yes
23 4.0 DIN 912 M3 8 mm no

STEP files? CAD Link?

If you are looking for the CAD link to tamper with the design or to export the parts in formats other than STL you can find the links bellow.
Be warned though! The link directs to a live - bleeding edge - version of this particular EVA module - there is no promise it will be the same version as what you see above nor does it have to be the version Rat Rig provides.

I understand, please give me the link

CAD